Collection: 4Everguard Clean-Sanitize-Protect Boat & Pontoon Kits

"The best hull and topside protection I've ever used"

"Boating is more fun and less hassle - cleanup is so much easier"

"Titania has saved me $ Thousands in Cleaning and many hours of labor"

That's what Boat Owners, Detailers and Marinas tell us after testing and using our product and comparing our eco-friendly 4Everguard Titania CSP (Clean, Sanitize, Protect) to caustic bottom sanding, paint prep and bottom paint treatment (many of those bottom paints are harmful to marine life btw) or expensive ceramic coatings that don't protect for long in fresh or salt water.  

Watch the CEO of the Independent Michigan Lab reveal 3 months of salt water testing (Florida) on aluminum and gel coat panels provided by one of the largest Boat companies in the world directly to the lab for testing:

We were challenged to test in salt water by a Publicly Held Company:

"Sure, it works in fresh water lakes in the Midwest, but what about salt water, that's much, much tougher?"

Contact us for an exclusive look at the Lab report.

4Everguard Protection portion of CSP is the same approach on gelcoat, aluminum pontoon or topside on just about every surface. Even the head, galley and carpets/fabric/leather are protected against the environment, UV fading, odors, stains and will make any cleaning faster and easier. Don't trust us, look at our Case Studies on a variety of surfaces.

Still not sure, check out one of our Great Lakes Detailers below. He now uses CSP on his own sailboat and recommends it to his customers:

Still thinking? If you want to spend money on complex bottom paint mixes that require a gas mask, hours and days of prep and painting, or time consuming ceramic coatings on the hull, we don't blame you. It's what was done in the past. You go with what you know until something better comes along. 

If you want to save yourself the labor, reduce annual costs and the protective equipment and shorten your cleanup to minutes instead of hours, order our Boat Kit or ask your Detailer or Marina to get in contact with us on how to eliminate many hours of cleaning, sanding and mixing. 

Best time to apply? On a new purchase. Don't believe us? Watch this:



Second best time to apply? When you're tired of cleaning your older boat, over and over. 

What do you need to get those results?

Our CSP process - Clean, Sanitize, Protect. A clean, dry, prepared surface - Hull, Topside or Galley. Lot of info on our Application Instruction pages and specific to Boating but a quick primer below:

  • Make sure the surface is clean and dry of algae and other environmental debris. You can use our Cyclone or your preferred cleaner to ensure the surface is clean and dry. You can even apply it over the top of a clean coat of VC17!
  • We recommend applying our spray on and buff Graphene Ceramic on the clean/dry hull or aluminum pontoon (or our Dry Wash and Wax). Both are spray and wipe and can be applied quickly and easily, following our directions for each product. 
  • Topside, galley, etc do not need Dry Wash and Wax or a Graphene Ceramic layer, and neither of those products can be used on soft surfaces (think fabric, leather, carpet). You can use SafeTGard to clean and create an antiseptic surface on soft and hard surfaces before applying Titania for long term protection against mold, mildew, stains, odor etc.
  • Once you have hand buffed the hull or aluminum pontoons you proceed to applying Titania per the instructions for Marine using the cross hatch method. Although the general instructions and specific Marine instructions are simple they are specific based on the situation and type of surface - we recommend reviewing, practicing and following the steps for best results. 
  • On soft surfaces and counters, we recommend using SafeTGard to clean and sanitize and then applying Titania after the surface has dried. For more difficult stains on carpet or fabric, use Velour to clean. 

If you'd like a long term warranty, ask your Detailer to get in touch with us and we can provide long term warranties to protect your watercraft. 

CSP - Choose What you Need

CSP: Clean-Sanitize-Protect by 4Everguard is flexible. If you have a cleaning, sanitizing and protection prep product already, you may substitute but make sure you add the final protection product, Titania.

Read about the options below and then you can add them to your shopping cart.

  • Clean (Hard Surface) Option

    For heavy cleaning, we prefer to use Cyclone, a military grade cleaner and degreaser for hard surfaces AND it is eco-friendly

    Learn More - Add to Cart 
  • Clean (Fabric, Carpet, etc) Option

    We love Velour because it removes tough stains from a variety of soft surfaces like fabric, carpet, leather etc. without degrading the surface

    Learn More - Add to Cart 
  • Sanitize & Disinfect (Anti bacterial, anti-viral, anti-microbial) Option

    SafeTGard is our preferred EPA Hospital grade cleaner/disinfectant. It works as a light cleaner & disinfectant to ensure a surface is hospital grade.

    Learn More - Add to Cart 
  • Clean/Prep for Long Term Protection - Option

    For a Hard Surface that has light dirt (including glass and mirrors) this product is a two step spray/wipe clean and then buff to a shine. It cleans and provides short term wax surface protection. Adding Titania over top provides years of long term protection

    Learn More - Add to Cart 
  • Protect - Prep for Titania Long Term - Option

    Graphene Ceramic is the latest spray and buff two step coating. It provides extra shine and durability, better than wax and can last up to a year. We use it as a prep product on painted surfaces or gelcoat before applying Titania for long term protection

    Learn More - Add to Cart 
  • Protect - Required for CSP Long Term Protection/Cleanability

    Titania is our unique Long Term Hull/Pontoon and Topside/Galley Surface Protectant. It is rapidly changing how Marine Professionals protect their Marine Assets. Salt Water Lab testing is here and Fresh Water Real World Experience is here.

    Learn More - Add to Cart 
  • Application - Blower Nozzle Only

    4Everguard's versatile Nozzle attaches to almost any top brand name blower. It is required for you to properly apply Titania for years of protection

    Learn More - Add to Cart 
  • Application - Corded Blower & Nozzle Kit

    If you do not own a blower we have a complete corded blower including nozzle and plastic dispensing bottles that attach to the blower

    Learn More - Add to Cart 
  • Application - Small Surfaces

    You can use our Flairosol for Small Showers and Bathroom Surfaces up to 50-100 sq ft. We recommend the blower and or blower and nozzle kits for larger jobs.

    Learn More - Add to Cart